Render Repair FAQs
Straight answers to the questions we're asked most.
How much does render repair cost in the UK?
Small render crack repairs start from around £150, while patch repairs of blown render typically cost £60 to £120 per square metre in the UK in 2026. Pebbledash patches cost a little more because the aggregate is thrown by hand. Scaffolding or towers for upper floors and painting to blend the repair are often the biggest extra costs.
Is cracked render a serious problem?
Cracked render can become serious because it lets water get behind the render and into the wall. Fine surface crazing is usually cosmetic, but cracks from window corners, horizontal cracks and anything wider than about 5mm should be checked. Water trapped behind render can cause blown patches, internal damp and frost damage, so repairing cracks early is cheaper.
Can you patch render or does it need redoing?
Render can usually be patched if the damaged areas are limited and the rest is firmly bonded. As a rough guide, if more than a third of an elevation sounds hollow, a full re-render of that wall is often better value. A good renderer will tap the entire wall and tell you honestly which approach will last.
How do I know if my render is blown?
Blown render sounds hollow when you tap it gently with a knuckle or the handle of a screwdriver, compared with a solid sound where it is bonded. Other signs include bulges, cracks forming a rough outline and patches that move when pressed. It often appears near ground level, around windows and below leaking gutters or downpipes.
Why does render crack?
Render cracks for several reasons: shrinkage while drying, a mix that was too strong, missing movement joints, rusting steel beads, building movement or water freezing behind the surface. Cracks at window corners often come from stress concentrations or lintel movement. Identifying the cause matters, because simply filling a crack without fixing the reason usually means it returns.
Can render repairs be matched to the existing finish?
Render repairs can be closely matched, but an exact invisible match is difficult because weathering changes colour and texture over time. For painted render, repainting the whole elevation after repair gives a uniform finish. For silicone render, recoating a complete panel between corners or beads hides repairs best. Pebbledash aggregate can rarely be matched perfectly.
Can render cause damp inside the house?
Yes, defective render can cause damp inside. Cracks let rain in behind the render, where it soaks into the wall and appears as damp patches inside. Render that bridges the damp proof course can draw ground moisture upwards. On older solid walls, cement render can trap moisture that would otherwise evaporate, causing persistent internal damp and decay.
Should I remove cement render from an old house?
On a solid-walled house built before around 1920, failing cement render is often best removed and replaced with breathable lime render. Cement traps moisture in these walls, which can cause internal damp and damage soft bricks and stone. Removal needs care to avoid damaging the masonry face, and the wall usually needs time to dry before re-rendering.
How do you clean green algae off render?
Green algae on render should be removed with a render-safe biocide applied to the wall, left to work, then gently washed off at low pressure. High-pressure washers can damage the surface and push water into cracks. A protective treatment afterwards slows regrowth. Fixing leaking gutters and cutting back overhanging plants helps stop algae returning.
Can render be repaired in winter?
Small render repairs can sometimes be done in winter on mild, dry days, but most render products should not be applied below about 5°C or when frost is forecast. Cold slows curing and frost can damage fresh render. Temporary repairs to stop water getting in can be made in winter, with full repairs scheduled for spring.
Will my home insurance cover render repair?
Home insurance usually covers render damage caused by a sudden event such as a storm, impact or falling tree, but not gradual wear, poor workmanship or age-related failure. Check your policy and take photos before repairs start. Insurers may want a contractor's report explaining the cause, so ask your renderer to put findings in writing.
Is falling render dangerous?
Falling render can be dangerous, especially from upper floors above paths, doorways and driveways. Large sheets of cement render can weigh several kilograms. If render is visibly bulging or loose above an area people use, keep it clear and arrange an urgent inspection. A renderer can remove loose material safely and make the area secure until repairs are done.
Get a free render repair quote
Tell us what you need and we'll come back with a clear price.
Request a quote