Render Repair

Render Repair

Blown and Hollow Render Repair

Finding render that has lost its bond with the wall, cutting it back to sound edges and rebuilding the coats.

Free Render Repair quote

No obligation. We only use your details to reply about this job.

Blown and Hollow Render Repair — Render Repair

What's involved

Blown render has separated from the wall behind, so it sounds hollow when tapped and may bulge or crack. It is usually caused by water getting behind the render, frost action, poor original preparation or render applied to a dusty or painted surface. The renderer taps across the whole elevation with a small hammer and marks every hollow area, because what you can see is often only part of the problem. Each area is cut back with a disc to a clean, square edge where the render is still firmly bonded. The exposed masonry is brushed down and checked, then rebuilt in matching coats of the same thickness, finished to blend with the surrounding texture. Patches of one to two square metres can often be completed in a day, plus drying time before painting.

How we handle it

  1. Send photos of the damage

    Use the quote form to show us cracks, bulges, missing patches or stains, and tell us roughly how large the affected area is and how high up it sits. Mention any damp appearing on inside walls nearby.

  2. On-site inspection

    A local renderer taps the walls to map hollow areas, checks gutters, sills, beads and the damp proof course, and identifies what caused the failure. They explain whether repair or re-render gives better value.

  3. Clear, itemised quote

    You receive a written quote listing each repair area, the cause to be fixed, access needed such as towers or scaffold, the finish to be matched and any decoration required to blend the repair in.

  4. Cut back and rebuild

    Damaged render is cut back to sound edges, the wall is prepared, beads are replaced where needed and new render coats are applied to the same thickness and texture as the surrounding finish.

  5. Blend and tidy up

    Once cured, repairs are painted or recoated to blend in, the area is cleaned and waste is removed. You get photos of the finished repair and advice on any areas worth watching.

Price guide

Render repair is priced by the size and number of repair areas, how hard they are to reach, and how much work is needed to match the finish. Small, low-level repairs are often quoted as a fixed job, while larger areas are priced per square metre. These are typical UK guide prices for 2026, excluding structural repairs to the wall itself.

  • Render clean and algae treatment: £400–£1,200. Biocide treatment and soft wash for a typical house, depending on elevations and access.
  • Corner bead replacement: £200–£450 per corner. Single-storey corner; two-storey corners need a tower or scaffold, which is priced separately.
  • Pebbledash patch repair: £70–£130 per m². Includes new render and hand-thrown matching aggregate; painting to blend is usually extra.

Questions about blown and hollow render repair

How much does render repair cost in the UK?

Small render crack repairs start from around £150, while patch repairs of blown render typically cost £60 to £120 per square metre in the UK in 2026. Pebbledash patches cost a little more because the aggregate is thrown by hand. Scaffolding or towers for upper floors and painting to blend the repair are often the biggest extra costs.

Is cracked render a serious problem?

Cracked render can become serious because it lets water get behind the render and into the wall. Fine surface crazing is usually cosmetic, but cracks from window corners, horizontal cracks and anything wider than about 5mm should be checked. Water trapped behind render can cause blown patches, internal damp and frost damage, so repairing cracks early is cheaper.

Can you patch render or does it need redoing?

Render can usually be patched if the damaged areas are limited and the rest is firmly bonded. As a rough guide, if more than a third of an elevation sounds hollow, a full re-render of that wall is often better value. A good renderer will tap the entire wall and tell you honestly which approach will last.

Get a free render repair quote

Tell us what you need and we'll come back with a clear price.

Request a quote