Render Repair

Nationwide · England, Scotland & Wales

Render Repair across the UK

Cracked, blown or stained render fixed before water gets behind it.

In short

Render Repair is a UK service that diagnoses and fixes failing external render on homes and commercial buildings. Specialists find hollow, cracked or blown areas, cut them back to sound edges, address the cause such as water ingress or movement, then patch, reinforce and blend the finish so the wall is weathertight again without re-rendering the whole building.

  • Free, no-obligation quotes
  • Vetted, insured specialists
  • Clear fixed prices

Free Render Repair quote

No obligation. We only use your details to reply about this job.

Fixed, clear prices

One all-in price before any work starts.

Vetted specialists

Insured teams who do this work every week.

Responsible disposal

Licensed waste routes and proper paperwork.

500 areas covered

Pages for every town we serve.

Render rarely fails all at once. It starts with a hairline crack under a window, a hollow sound when you tap a wall, or a bulge near the ground. Water gets in behind, freezes, and a small patch becomes a sheet falling off the house. Catching it early usually means a repair rather than a full re-render. We arrange render repair across the UK through vetted, insured local renderers who find the cause, not just the symptom.

Our specialists fix cracks, blown and hollow patches, failed pebbledash and roughcast, damaged corners and beads, and stained or algae-covered silicone render. They also tell you honestly when patching will not last and a section or full re-render makes more sense. Send us photos of the damage and a rough idea of its size, and a local renderer will inspect, explain what has gone wrong and give you a clear, itemised quote.

How it works

  1. Send photos of the damage

    Use the quote form to show us cracks, bulges, missing patches or stains, and tell us roughly how large the affected area is and how high up it sits. Mention any damp appearing on inside walls nearby.

  2. On-site inspection

    A local renderer taps the walls to map hollow areas, checks gutters, sills, beads and the damp proof course, and identifies what caused the failure. They explain whether repair or re-render gives better value.

  3. Clear, itemised quote

    You receive a written quote listing each repair area, the cause to be fixed, access needed such as towers or scaffold, the finish to be matched and any decoration required to blend the repair in.

  4. Cut back and rebuild

    Damaged render is cut back to sound edges, the wall is prepared, beads are replaced where needed and new render coats are applied to the same thickness and texture as the surrounding finish.

  5. Blend and tidy up

    Once cured, repairs are painted or recoated to blend in, the area is cleaned and waste is removed. You get photos of the finished repair and advice on any areas worth watching.

Render Repair prices

Render repair is priced by the size and number of repair areas, how hard they are to reach, and how much work is needed to match the finish. Small, low-level repairs are often quoted as a fixed job, while larger areas are priced per square metre. These are typical UK guide prices for 2026, excluding structural repairs to the wall itself.

JobGuide priceNotes
Small crack repair, ground floorfrom £150Opening, filling and reinforcing a few short cracks reachable from the ground or a small platform.
Patch repair of blown render£60–£120 per m²Cutting back to sound edges and rebuilding matching coats; small patches have a minimum charge.
Pebbledash patch repair£70–£130 per m²Includes new render and hand-thrown matching aggregate; painting to blend is usually extra.
Corner bead replacement£200–£450 per cornerSingle-storey corner; two-storey corners need a tower or scaffold, which is priced separately.
Render clean and algae treatment£400–£1,200Biocide treatment and soft wash for a typical house, depending on elevations and access.
Render survey with written report£150–£350Tapping survey, photos and recommendations; often credited if you go ahead with the repairs.

What affects the price →

Who we work for

Homeowners with cracked render

People who have noticed cracks, bulges or hollow patches and want them fixed before water gets in and a small repair turns into a costly full re-render.

House buyers and sellers

Buyers whose survey flagged defective render, and sellers who want visible cracks and missing patches repaired so the house presents well and passes the buyer's survey.

Landlords and letting agents

Landlords dealing with damp complaints, tenant safety concerns about falling render, or tired-looking rental properties that need a cost-effective repair and refresh.

Owners of period homes

Owners of older solid-wall properties needing lime-based repairs, or removal of failed cement render that is trapping moisture and damaging the brick or stone beneath.

Property managers

Managing agents and housing providers who need repairs on blocks and terraces carried out safely, documented with photos and coordinated with residents and access arrangements.

Rules and standards that apply

  • BS EN 13914-1 is the British and European standard covering the design, preparation and application of external render, and covers matters such as substrate preparation and detailing that also guide good repairs.
  • Work at height on render repairs falls under the Work at Height Regulations 2005, so contractors must plan the work and use suitable equipment such as scaffolding or towers rather than leaning ladders for extended jobs.
  • Listed buildings require listed building consent for alterations that affect their character, and replacing lime render with cement or changing the finish may need consent from the local planning authority.

How to choose the right render repair company

  • Ask the renderer to explain what caused the render to fail and how the repair will address that cause.
  • Check they tap-test the whole wall rather than repairing only the obvious visible damage.
  • Ask how they will match the existing texture and colour, and whether repainting the elevation is recommended.
  • Make sure they use lime-based repairs on solid-walled period homes rather than hard cement patches.
  • Confirm the quote states the access method, such as ladders, towers or scaffolding, and who arranges it.
  • Check they hold public liability insurance and will be honest if a full re-render is better value than patching.

Frequently asked questions

How much does render repair cost in the UK?

Small render crack repairs start from around £150, while patch repairs of blown render typically cost £60 to £120 per square metre in the UK in 2026. Pebbledash patches cost a little more because the aggregate is thrown by hand. Scaffolding or towers for upper floors and painting to blend the repair are often the biggest extra costs.

Is cracked render a serious problem?

Cracked render can become serious because it lets water get behind the render and into the wall. Fine surface crazing is usually cosmetic, but cracks from window corners, horizontal cracks and anything wider than about 5mm should be checked. Water trapped behind render can cause blown patches, internal damp and frost damage, so repairing cracks early is cheaper.

Can you patch render or does it need redoing?

Render can usually be patched if the damaged areas are limited and the rest is firmly bonded. As a rough guide, if more than a third of an elevation sounds hollow, a full re-render of that wall is often better value. A good renderer will tap the entire wall and tell you honestly which approach will last.

How do I know if my render is blown?

Blown render sounds hollow when you tap it gently with a knuckle or the handle of a screwdriver, compared with a solid sound where it is bonded. Other signs include bulges, cracks forming a rough outline and patches that move when pressed. It often appears near ground level, around windows and below leaking gutters or downpipes.

Why does render crack?

Render cracks for several reasons: shrinkage while drying, a mix that was too strong, missing movement joints, rusting steel beads, building movement or water freezing behind the surface. Cracks at window corners often come from stress concentrations or lintel movement. Identifying the cause matters, because simply filling a crack without fixing the reason usually means it returns.

Can render repairs be matched to the existing finish?

Render repairs can be closely matched, but an exact invisible match is difficult because weathering changes colour and texture over time. For painted render, repainting the whole elevation after repair gives a uniform finish. For silicone render, recoating a complete panel between corners or beads hides repairs best. Pebbledash aggregate can rarely be matched perfectly.

Can render cause damp inside the house?

Yes, defective render can cause damp inside. Cracks let rain in behind the render, where it soaks into the wall and appears as damp patches inside. Render that bridges the damp proof course can draw ground moisture upwards. On older solid walls, cement render can trap moisture that would otherwise evaporate, causing persistent internal damp and decay.

Should I remove cement render from an old house?

On a solid-walled house built before around 1920, failing cement render is often best removed and replaced with breathable lime render. Cement traps moisture in these walls, which can cause internal damp and damage soft bricks and stone. Removal needs care to avoid damaging the masonry face, and the wall usually needs time to dry before re-rendering.

See all FAQs →

Get a free render repair quote

Tell us what you need and we'll come back with a clear price.

Request a quote