Render Repair
Silicone and Monocouche Render Repair
Repairing impact damage, cracks and staining on modern thin-coat and through-coloured render systems.
What's involved
Modern render systems can be repaired, but matching them needs care. Small dents and gouges in silicone render are cut back, refilled with basecoat and mesh, primed, then finished with a matching colour and grain size from the same manufacturer where possible. Even with a perfect product match, a new patch can look slightly different until it weathers, so renderers often recoat a whole panel between natural breaks such as corners or beads. Monocouche repairs involve applying matching through-coloured render and scraping it back to the same texture once firm. Green algae, black mould and dirt streaks are removed with a render-safe biocide and a soft wash, never a high-pressure washer that can damage the surface. A protective treatment can then help slow regrowth. Most cosmetic repairs on one elevation take one to two days.
How we handle it
Send photos of the damage
Use the quote form to show us cracks, bulges, missing patches or stains, and tell us roughly how large the affected area is and how high up it sits. Mention any damp appearing on inside walls nearby.
On-site inspection
A local renderer taps the walls to map hollow areas, checks gutters, sills, beads and the damp proof course, and identifies what caused the failure. They explain whether repair or re-render gives better value.
Clear, itemised quote
You receive a written quote listing each repair area, the cause to be fixed, access needed such as towers or scaffold, the finish to be matched and any decoration required to blend the repair in.
Cut back and rebuild
Damaged render is cut back to sound edges, the wall is prepared, beads are replaced where needed and new render coats are applied to the same thickness and texture as the surrounding finish.
Blend and tidy up
Once cured, repairs are painted or recoated to blend in, the area is cleaned and waste is removed. You get photos of the finished repair and advice on any areas worth watching.
Price guide
Render repair is priced by the size and number of repair areas, how hard they are to reach, and how much work is needed to match the finish. Small, low-level repairs are often quoted as a fixed job, while larger areas are priced per square metre. These are typical UK guide prices for 2026, excluding structural repairs to the wall itself.
- Render survey with written report: £150–£350. Tapping survey, photos and recommendations; often credited if you go ahead with the repairs.
- Render clean and algae treatment: £400–£1,200. Biocide treatment and soft wash for a typical house, depending on elevations and access.
- Corner bead replacement: £200–£450 per corner. Single-storey corner; two-storey corners need a tower or scaffold, which is priced separately.
Questions about silicone and monocouche render repair
How much does render repair cost in the UK?
Small render crack repairs start from around £150, while patch repairs of blown render typically cost £60 to £120 per square metre in the UK in 2026. Pebbledash patches cost a little more because the aggregate is thrown by hand. Scaffolding or towers for upper floors and painting to blend the repair are often the biggest extra costs.
Is cracked render a serious problem?
Cracked render can become serious because it lets water get behind the render and into the wall. Fine surface crazing is usually cosmetic, but cracks from window corners, horizontal cracks and anything wider than about 5mm should be checked. Water trapped behind render can cause blown patches, internal damp and frost damage, so repairing cracks early is cheaper.
Can you patch render or does it need redoing?
Render can usually be patched if the damaged areas are limited and the rest is firmly bonded. As a rough guide, if more than a third of an elevation sounds hollow, a full re-render of that wall is often better value. A good renderer will tap the entire wall and tell you honestly which approach will last.
Other services
Crack Repair
Raking out, filling and reinforcing cracks in render, from fine crazing to structural cracks needing investigation first.
Blown and Hollow Render Repair
Finding render that has lost its bond with the wall, cutting it back to sound edges and rebuilding the coats.
Pebbledash and Roughcast Repair
Patching failed pebbledash or roughcast with matching aggregate, or advising when full removal is the better option.
Bead and Corner Repair
Replacing rusted or damaged corner beads, stop beads and bellcasts that cause staining, cracking and render loss.
Render Survey and Damp Investigation
Tapping, inspection and moisture checks to map failing render and find the cause before any repair starts.
Silicone and Monocouche Render Repair near you
Get a free render repair quote
Tell us what you need and we'll come back with a clear price.
Request a quote