Render Repair
Render Survey and Damp Investigation
Tapping, inspection and moisture checks to map failing render and find the cause before any repair starts.

What's involved
A good repair starts with understanding why the render failed. The renderer inspects every elevation, taps for hollowness, maps cracks and checks the details that usually cause trouble: leaking gutters and downpipes, missing sill drips, render bridging the damp proof course, ground levels too high against the wall and cement render on solid walls that need to breathe. Where damp is showing inside, they look at whether it lines up with external defects. You receive a short written summary with photos, showing which areas need repair, which need watching and whether a full re-render would give better value. If cracks suggest structural movement, they will recommend a structural engineer or surveyor before any render work. A survey of a typical house takes an hour or two and helps avoid paying for repairs that will not last.
How we handle it
Send photos of the damage
Use the quote form to show us cracks, bulges, missing patches or stains, and tell us roughly how large the affected area is and how high up it sits. Mention any damp appearing on inside walls nearby.
On-site inspection
A local renderer taps the walls to map hollow areas, checks gutters, sills, beads and the damp proof course, and identifies what caused the failure. They explain whether repair or re-render gives better value.
Clear, itemised quote
You receive a written quote listing each repair area, the cause to be fixed, access needed such as towers or scaffold, the finish to be matched and any decoration required to blend the repair in.
Cut back and rebuild
Damaged render is cut back to sound edges, the wall is prepared, beads are replaced where needed and new render coats are applied to the same thickness and texture as the surrounding finish.
Blend and tidy up
Once cured, repairs are painted or recoated to blend in, the area is cleaned and waste is removed. You get photos of the finished repair and advice on any areas worth watching.
Price guide
Render repair is priced by the size and number of repair areas, how hard they are to reach, and how much work is needed to match the finish. Small, low-level repairs are often quoted as a fixed job, while larger areas are priced per square metre. These are typical UK guide prices for 2026, excluding structural repairs to the wall itself.
- Render clean and algae treatment: £400–£1,200. Biocide treatment and soft wash for a typical house, depending on elevations and access.
- Corner bead replacement: £200–£450 per corner. Single-storey corner; two-storey corners need a tower or scaffold, which is priced separately.
- Pebbledash patch repair: £70–£130 per m². Includes new render and hand-thrown matching aggregate; painting to blend is usually extra.
Questions about render survey and damp investigation
How much does render repair cost in the UK?
Small render crack repairs start from around £150, while patch repairs of blown render typically cost £60 to £120 per square metre in the UK in 2026. Pebbledash patches cost a little more because the aggregate is thrown by hand. Scaffolding or towers for upper floors and painting to blend the repair are often the biggest extra costs.
Is cracked render a serious problem?
Cracked render can become serious because it lets water get behind the render and into the wall. Fine surface crazing is usually cosmetic, but cracks from window corners, horizontal cracks and anything wider than about 5mm should be checked. Water trapped behind render can cause blown patches, internal damp and frost damage, so repairing cracks early is cheaper.
Can you patch render or does it need redoing?
Render can usually be patched if the damaged areas are limited and the rest is firmly bonded. As a rough guide, if more than a third of an elevation sounds hollow, a full re-render of that wall is often better value. A good renderer will tap the entire wall and tell you honestly which approach will last.
Other services
Crack Repair
Raking out, filling and reinforcing cracks in render, from fine crazing to structural cracks needing investigation first.
Blown and Hollow Render Repair
Finding render that has lost its bond with the wall, cutting it back to sound edges and rebuilding the coats.
Pebbledash and Roughcast Repair
Patching failed pebbledash or roughcast with matching aggregate, or advising when full removal is the better option.
Silicone and Monocouche Render Repair
Repairing impact damage, cracks and staining on modern thin-coat and through-coloured render systems.
Bead and Corner Repair
Replacing rusted or damaged corner beads, stop beads and bellcasts that cause staining, cracking and render loss.
Render Survey and Damp Investigation near you
Get a free render repair quote
Tell us what you need and we'll come back with a clear price.
Request a quote