Render Repair

Guide · Homeowners · 3 min read · Updated 17 November 2026

How to Clean Render: Removing Algae, Green Stains and Dirt

Short answer

Green and black staining on render is usually algae, lichen or mould growing on damp, shaded walls. The safe way to clean it is a biocide treatment, left to work, followed by a low-pressure soft wash. High-pressure jet washing can damage render, especially thin-coat silicone. Professional render cleaning for a typical house costs around £400–£1,200 depending on elevations and access.

How to Clean Render: Removing Algae, Green Stains and Dirt

What causes render staining

Render is often stained by organic growth rather than dirt. Algae, lichens and moulds grow where walls stay damp: north-facing elevations, walls under trees, areas near leaking gutters and parts of the wall shaded by neighbouring buildings. The staining shows as green, red-brown or black patches, often in streaks below sills and around downpipes.

Other stains include rust from corroding beads and fixings, dirt run-off below sills and copings, and efflorescence, the white salt bloom that appears when moisture carries salts out of masonry. Each needs a different approach, so identifying the cause comes first.

StainLikely causeUsual treatment
Green patchesAlgae on damp, shaded renderBiocide and soft wash
Black spots or streaksMould or lichenBiocide, repeat if needed
Orange-brown linesRusting beads or fixingsRepair beads, then clean
Grey streaks below sillsDirt run-off, poor dripsClean, improve sill detail
White bloomSalts carried by moistureDry brush, fix moisture source

Why jet washing is risky

A pressure washer seems like the obvious tool, but high pressure can damage render. On thin-coat silicone render, which may be only around 1.5mm to 2mm thick, a narrow jet can erode the finish and expose the basecoat. On painted render, it can strip paint unevenly. On older sand and cement or pebbledash, it can force water into cracks and loosen stones.

High pressure also tends to remove only the visible growth, leaving spores in the surface that regrow quickly. That is why professionals use biocides to kill growth first and then rinse at low pressure.

The soft wash method

Soft washing means applying a cleaning and biocidal solution at low pressure, letting it dwell to kill and loosen the growth, then rinsing gently. The process is suitable for most render types when the products are chosen correctly for the surface. Many render manufacturers publish cleaning guidance for their systems, and following it protects any product warranty.

Some biocides keep working for weeks after application, with staining continuing to fade as the growth dies and weathers away. A second treatment is sometimes needed on heavily affected walls.

  • Protect plants, ponds and paving before treatment
  • Apply biocide at low pressure and leave to dwell
  • Rinse gently with a low-pressure, wide spray
  • Allow time for residual action to fade staining
  • Repeat on heavily affected north-facing walls

Cleaning it yourself

On a ground-floor wall with light staining, you can often clean render yourself using a biocidal masonry cleaner from a builders' merchant, applied with a garden sprayer and following the label. Wear gloves and eye protection, cover nearby plants and avoid working in strong sun or when rain is forecast.

For upper floors, use a professional. Under the Work at Height Regulations 2005, work at height must be planned with suitable equipment, and spraying chemicals from a ladder is hazardous. Professional cleaning for a typical house costs around £400–£1,200, depending on the number of elevations, the level of growth and access.

Stopping the staining coming back

Cleaning treats the symptom. To slow regrowth, reduce how wet the wall stays. Fix leaking gutters and downpipes, cut back overhanging trees and shrubs, and check that sills and copings have drips that throw water clear of the wall. Where water runs down the render in streams, there is usually a detailing fault above.

Some protective treatments can be applied after cleaning to slow regrowth, but they must be compatible with the render. On silicone render, check with the manufacturer first. On painted render, an anti-fungal masonry paint can help when you next redecorate.

Cleaning different types of render

Each render type needs a slightly different approach. Thin-coat silicone render is the most delicate to clean because the finish is thin, but it usually responds well to biocide alone, as its water-repellent surface makes growth easier to remove. Follow the manufacturer's cleaning guidance and avoid harsh chemicals or abrasive brushes that could dull the surface.

Monocouche render has a more open, scraped texture that holds dirt and spores. It generally tolerates gentle brushing and low-pressure rinsing after a biocide treatment. Painted sand and cement can be cleaned in the same way, but old, chalky masonry paint may come off with the dirt, so cleaning is often the first step before redecorating. Pebbledash and roughcast need care to avoid dislodging loose stones; a biocide left to work and a light rinse is usually enough. Lime render and limewash are soft and should be treated very gently, with products suitable for breathable traditional finishes. If you are not sure what type of render you have, get advice before using any chemical cleaner.

When staining signals a bigger problem

Persistent, heavy staining in one area often means the render there stays wet for a reason, such as a leak, a failed sill or render bridging the damp-proof course. Rust lines usually mean failing beads that will eventually crack the render. Treat these as repair jobs, not cleaning jobs.

We arrange vetted, insured local render specialists who can clean, treat and repair render, and point out the cause of recurring staining so the wall stays cleaner for longer.

Questions people also ask

Can I pressure wash my render?

It is risky. High pressure can erode thin-coat silicone render, strip paint and force water into cracks in older render. If you use a pressure washer, keep it on a low setting with a wide fan nozzle. A biocide treatment followed by a soft wash is the safer, longer-lasting method.

Why does my render keep going green?

Green growth is algae, which thrives on walls that stay damp, especially north-facing, shaded or tree-covered elevations. Leaking gutters and poor sill drips make it worse. Cleaning with a biocide kills existing growth, but reducing moisture on the wall is the key to slowing regrowth.

How much does it cost to clean render?

Professional render cleaning and algae treatment for a typical house costs around £400–£1,200, depending on the number of elevations, how heavy the growth is and access needs. Small ground-floor areas cost less. Repairs to beads, cracks or sills are priced separately.

Written and checked by the Render Repair team. Read our editorial policy.

Get a free render repair quote

Tell us what you need and we'll come back with a clear price.

Request a quote