Hampshire · South East
Render Repair in Havant
From hairline cracks to fallen patches, we match Havant homeowners with renderers who can repair rather than replace where it makes sense.
Havant and the surrounding area
Havant falls within Hampshire, South East. That includes the PO9, PO11 and PO7 postcode districts. Nearby places we also cover include Horndean, Purbrook, Emsworth, Southbourne and Rowlands Castle.
Working in Havant
Clay soils across much of the South East move with the seasons, which affects anything built into the ground, from walls and bases to drainage. Some new-build render in Havant stains green within a few years on north-facing walls, which cleaning and treatment can address.
1930s semis around Havant often have pebbledash that has loosened over decades, especially around bays and below windows. Render cracks around garage conversions in Havant are common where old door openings were infilled without proper detailing.
Our services in Havant
Blown and Hollow Render Repair
Finding render that has lost its bond with the wall, cutting it back to sound edges and rebuilding the coats.
Crack Repair
Raking out, filling and reinforcing cracks in render, from fine crazing to structural cracks needing investigation first.
Render Survey and Damp Investigation
Tapping, inspection and moisture checks to map failing render and find the cause before any repair starts.
Bead and Corner Repair
Replacing rusted or damaged corner beads, stop beads and bellcasts that cause staining, cracking and render loss.
Silicone and Monocouche Render Repair
Repairing impact damage, cracks and staining on modern thin-coat and through-coloured render systems.
Pebbledash and Roughcast Repair
Patching failed pebbledash or roughcast with matching aggregate, or advising when full removal is the better option.
Guide prices for Havant
- Render clean and algae treatment: £400–£1,200. Biocide treatment and soft wash for a typical house, depending on elevations and access.
- Render survey with written report: £150–£350. Tapping survey, photos and recommendations; often credited if you go ahead with the repairs.
- Small crack repair, ground floor: from £150. Opening, filling and reinforcing a few short cracks reachable from the ground or a small platform.
Prices are a guide. Your quote for Havant is a fixed price based on the details you give us. Full price guide.
Render Repair questions from Havant
Is my cracked render in Havant a structural problem?
Most render cracks in Havant are not structural, but stepped cracks or those wider than about 5mm may indicate movement. A renderer will advise if a surveyor or structural engineer should look first.
Can render repairs in Havant be done without scaffolding?
Ground-floor repairs in Havant can usually be done from the ground or small platforms. Upper floors normally need a tower or scaffold for safe working, which your quote should include.
Can you clean stained render in Havant?
Yes, renderers covering Havant remove algae, mould and dirt from render using biocide treatments and gentle washing, avoiding high-pressure washers that can damage the surface.
Will render repairs show on my Havant home?
Repairs in Havant can be closely matched, but weathering makes exact matches difficult. Repainting or recoating a whole elevation or panel usually gives the most uniform result.
Can render repairs be matched to the existing finish?
Render repairs can be closely matched, but an exact invisible match is difficult because weathering changes colour and texture over time. For painted render, repainting the whole elevation after repair gives a uniform finish. For silicone render, recoating a complete panel between corners or beads hides repairs best. Pebbledash aggregate can rarely be matched perfectly.
Why does render crack?
Render cracks for several reasons: shrinkage while drying, a mix that was too strong, missing movement joints, rusting steel beads, building movement or water freezing behind the surface. Cracks at window corners often come from stress concentrations or lintel movement. Identifying the cause matters, because simply filling a crack without fixing the reason usually means it returns.
Helpful guides
Blown Render: Patch Repair or Full Re-Render?
Blown render has lost its bond with the wall and sounds hollow when tapped. Isolated blown areas can be cut back to sound edges and patched…
Read the guide →Pebbledash Repair or Removal: Options, Costs and What to Expect
Small areas of failed pebbledash can be patched by cutting back to sound render, applying new render and hand-throwing matching aggregate…
Read the guide →Get a free render repair quote in Havant
Tell us what you need and we'll come back with a clear price.
Request a quote